PS600 C-SJ8-5 Centrifugal Submersible Solar Water Pump

  • Lift up to 0 – 18 m
  • Maximum flow rate up to 11 m³/hour “Centrifugal”
  • Cost efficient pumping
  • Maintenance free
  • High reliability and life expectancy

LORENTZ was established in Hamburg, Germany and has been a quality designer and manufacture of Solar Pumps since 1993. Through the innovative electronic controlling, outstanding manufacturing quality and a simple design, Lorentz have managed to reduce the high cost of solar water pumping. Their submersible helical rotor pumps consist of only two parts, Lorentz’s brushless motors are water filled and maintenance free, while the electronics are NOT inside the submerged motor but easily accessible on the surface.

Applications

  • Drinking water supply
  • Livestock watering
  • Pond management
  • Irrigation
  • Windmill replacement
  • Dams, creeks, rivers and tanks

Warranty

  • 2 years manufacturer’s warranty against defects in material and workmanship

Features

Controller PS600

  • Controlling of the pump system and monitoring of the operating states
  • Mounted at surface (no submerged electronic parts)
  • Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
  • Automatic reset 20 minutes after well probe turns pump off
  • Protected against reverse polarity, overload and high temperature
  • Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
  • Solar operation: integrated MPPT (Maximum Power Point Tracking)
  • Battery operation: low voltage disconnect and restart after battery has recovered
  • Max. efficiency 92 % (motor + controller)

Motor ECDRIVE 600HR / C

  • Brushless DC motor
  • No electronics inside motor
  • Water filled
  • IP68, pressure balanced, unlimited submersion
  • Dynamic slide bearings, material: carbon/ ceramic
  • Wetted material: stainless steel (AISI316), POM, rubber, cable drinking water approved

Pump End – PE

  • High life expectancy
  • None-return valve
  • Dry running protection
  • Material: stainless steel (AISI 316), rubber

Technical Specifications

PS 600 C-SJ8-5
Lift 0 – 18 m
Maximum flow rate 11 m³/hour
Solar operation Nominal voltage 48-72V DC, Open circuit voltage max 150V DC
Solar Generator – Wp 300 – 900 W
Battery operation Nominal voltage 48V DC
Motor + Pump end packing dimension 660 x 160 x 150 mm 13.5 kg
Controller PS600 450 x 250 x 240 mm 5.30 kg

Quality and Safety

  • Stainless steel material – AISI 316
  • Enclosure IP 54 – sealed, weatherproof